News resistors
QATAR PHASE IX PROJECT
Metal Deploye Resistor recently delivered, for the national company of electricity in Qatar, Kahramaa, more than one hundred Neutral Grounding Resistors (NGR) for the project “Qatar Phase IX”. This project required the integration of resistor monitoring systems which allow ensuring the Neutral Grounding Resistor is not damaged after a fault has happened and will be [...]
BRAKING RESISTORS FOR INVERTERS
Resistors of power lower or equal to 2000 W Metal Deploye Resistor offers a wide range of braking resistors for inverters. Our resistors can dissipate up to 2000 w (2 kW) in continuous duty, with IP20 and 1600 W in IP23, allowing high load possibilities (more than 25 kW in 1 sec.) Most frequently asked references [...]
LOAD BANK IN MIDDLE EAST
2 load banks supplied by METAL DEPLOYE RESISTOR have just been commissioned at Kuwait International Airport. The load banks are installed in an emergency sub-station composed of 3 generator sets which supply energy to airport equipments in case of network power cut, and hereby ensures the air traffic. The load banks are used to [...]
Jobs & Careers
You can apply by sending your CV & application letter by email : info[at]mdresistor.com You can also send your application letter & CV by mail to the following address : METAL DEPLOYE RESISTOR Direction des ressources humaines 1 route de Semur – BP150 21500 Montbard – France Click here to see our job offers
Neutral earthing resistors – Neutral grouding resistors – NER/NGR
By their nature and function, power distribution networks are often subject to incidental flaws. It is therefore important to install protection systems. This protection depends on the treatment of neutral. They are 3 methods of neutral earthing : Neutral isolated (Fig. 1) – This technique induces significant risks in the event of one phase [...]
GRIDEX N&F
PRESENTATION The Gridex N (Natural convection cooling) or Gridex F (Air forced cooling) use precision cut expanded metal as resistances elements. These elements feature accurately controlled mesh having solid, integral ends for mouting and connection. DESIGNING OF ELEMENTS Type of mesh There are two basic mesh designs : open mesh : for low resistance values, [...]
Localization
METAL DEPLOYE RESISTOR ROUTE DE SEMUR – BP 150 21500 MONTBARD – FRANCE Tél. : 00 33 (0)3 80 89 58 58 Fax : 00 33 (0)3 80 92 24 33 E.mail : info@mdresistor.com See on GoogleMap here By A6 highway : Direction Paris/Lyon A6 : Exit No. 23 “Bierre les Semur” Hotels at Montbard and Semur En Auxois (18km [...]
